Scan Monitor Scope - Digital

Digital Storage Scan Monitor Scope - The traditional Scan Monitor Scope is only an X/Y-mode oscilloscope capable of displaying the X/Y plate raster or beam monitor/plate "M" picture for setup; it is switchable only to X/Y, I/X, I/Y inputs.

The Scan Monitor Scope has all of the features of the traditional monitor scope. It also has features for maintenance and troubleshooting as with a traditional digital storage oscilloscope:

• Display of each scan monitor signal in a selectable rate sweep format, maintaining the X/Y, I/X, I/Y switch outputs.
• Three (3) sweep rates for each of the X and Y scan frequencies while monitoring the X+, X-, Y+, and Y- scan monitor inputs, and the respective four (4) derivative inputs.
• AC or DC coupling of the scan monitor inputs in sweep mode.
• Separate derivative sweep inputs for direct connection to the ScanMaster amplifier derivative outputs.
• Display beam monitor signal in sweep mode.
• Store and recall up to 26 snapshots of the display, each stamped with time, date, mode of input, and frame number.
• 5 inch (diagonal) electroluminescent small graphics display for high brightness and high contrast.
• Parallel printer output, which can print from the active or stored display.
• Plug-compatible replacement of the traditional scan monitor scope.
• No rotary switches; no CRT.

The Brookhaven Scan Monitor Scope mounts in a standard 5¼ inch rack space.

Typical I/X "M" Pattern

View of X+ Derivative from ScanMaster

View of X+ Scan Signal including DC Offset

Return to BIC Home Page or Products